Check here for our news releases and recent publications.

News

Mar 9, 2010
Integran Awarded US Army Corps Contract
Read press release

Mar 8, 2010
Integran Technology Featured in Globe and Mail
Read press release

Sept 9, 2009
Integran partners with Magnetic Shield Corporation to market Nanovate EM coating for low frequency magnetic shielding
Read press release

Aug 19, 2009
Article on protecting medical electronics from electromagnetic interference (EMI) through the use of Integran's Nanovate EM featured in Medical Design Technology Magazine
Read article online

May 14, 2009
Integran's Nanovate EM featured in the 2009 Interference Technology EMC Directory and Design Guide
Read article online

April 30, 2009
Technical paper on the benefits of wire made from Integran's nanocrystalline alloys published in the April issue of Wire Journal
Read an excerpt

March 23, 2009
Integran's Nanovate CR featured in the April issue of Product Finishing Magazine
Read article online

March 6, 2009
Integran- Led Consortium Receives Funding from the Government of Canada for Clean Technology Development
Read press release

February 19, 2009
Integran Enters Into Collaborative Research Agreement With TransCanada Corporation and NOVA Research
Read press release

January 20, 2009
Integran featured in the Globe and Mail
Read article
Read article, business analysis, and Q&A (pdf)

December 18, 2008
Integran USA Awarded DoT Contract for Development of Gas Pipeline Repair Process
Read press release

November 27, 2008
Integran’s Nanovate NV coating featured in November issue of Plant Magazine
Read article (2MB pdf)

October 29, 2008
Integran introduces Nanovate EM coating for low frequency magnetic shielding
Read Press Release

September 3, 2008
Government of Canada Invests in Nanotechnology Coatings for Joint Strike Fighter Program
Read Press Release

July 28, 2008
Morph, Integran and DuPont Team up to Win SDTC Funding for Developing Lightweight Nanometal/Polymer Hybrid Automotive Parts to Improve Fuel Economy and Reduce Air Emissions
Read Press Release
Read Project Listing (See Project # 12)

June 9, 2008
Integran Featured in the University of Toronto’s Engineering Alumni Magazine (Skule Matters)
Read article (6MB pdf)

May 21, 2008
Integran to Participate in the Development of Enhanced Rotor Blades for the US Army as Part of a Sikorsky-Led Consortium
Read press release

May 12, 2008
Integran Awarded DoD Contract for Development of Cadmium Replacement Technology
Read press release

May 9, 2008
Integran’s Composite Tooling Technology Featured in May Issue of High Performance Composites
Read pdf

April 23, 2008
Integran Spin-off PowerMetal Featured in Small Times Magazine
Read press release

April 16, 2008
Integran Technologies USA Awarded Contract by US Department of Transportation
Read press release

April 14, 2008
Trevor Immelman Uses PowerMetal’s Nanotechnology-Enabled Epic Golf Shaft to Win Masters
Read press release

April 14, 2008
2008 Masters Champion uses Epic® Shaft for Win
Read press release

April 10, 2008
Metafuse™ Technology Featured in April Issue of Advanced Materials & Processes
Read article

March 20, 2008
Metafuse™ Nanotech Alliance Featured in March Issue of DESIGN-2-PART Magazine
Read article (6 MB pdf)

March 18, 2008
Integran introduces the Nanovate™-NS coating for adding erosion and damage protection to composite parts
Read press release

March 12, 2008
Integran Spin-Off PowerMetal Featured in March Issue of bizSanDiego
Read article (3 MB)

March 3, 2008
MetaFuse™ technology featured in March 2008 Issue of Plastix
Read article (Italian) (4.5 MB)

February 22, 2008
Integran Technologies USA Awarded Contract by US Air Force
Read press release

January 14, 2008
Integran’s Nanovate™-NV (Nanovar®) Composite Tooling Technology Highlighted in January 2008 Issue of High Performance Composites
Read article on publishers website

December 21, 2007
MetaFuse™ technology featured in the December issue of Automotive Design and Production
Read article on publishers website

December 5, 2007
Integran Receives 2007 IRAP Regional Innovation Award for New Technology
Read press release

November 29, 2007
Morph Technologies Receives Investment from DuPont Engineering Polymers
Read press release

November 15, 2007
MetaFuse™ featured in the November issue of Plastics Technology
Read article

November 1, 2007
Integran receives support from Canadian Government for the development of Nanometal-polymer hybrid materials for consumer electronics
Read press release

October 26, 2007
Integran and DuPont Engineering Polymers enter into a Market Development Alliance agreement for Nanotechnology-enabled materials
Read press release

October 24, 2007
DuPont Announces Nanotechnology Alliance with Integran and its Affiliates for Metafuse™ Metal/Polymer Hybrid Technology
Read press release

October 23, 2007
Integran Named Canadian Innovative Business of the Year
Read press release
Read company profile

October 19, 2007
Integran and Advanced Composites Group (ACG) enter into a joint development agreement for composite part tooling
Read press release

October 1, 2007
Integran Awarded US Air Force Funding through the Pennsylvania NanoMaterials Commercialization Center for Nanometal Co-Axial Wire Technology
Read press release

September 25, 2007
Integran’s Technologies Featured in Product Finishing Magazine
Read article on website Integran is featured in the final section labeled "Nanocrystalline Metals"

September 10, 2007
Integran Selected as a Finalist for the Prestigious 2007 Innovative Canadian Business of the Year Award
Read press release

August 8, 2007
Integran Technologies USA Awarded Contract by US Air Force
Read press release

June 8, 2007
Integran’s Golf Shaft Technology Featured in May Issue of Design Product News – “Nanotech Shafts Keep Golfers on Target”
Read full article at Product Design News (pdf)

May 29, 2007
Integran Receives Support from Canadian Government for the Development of Nanotechnology-Enabled Composite Tooling
Read press release

May 21, 2007
Grafalloy Epic® Golf Shaft Featuring Integran’s Metallurgical Nanotechnology and Manufactured by Integran Spin-off PowerMetal, Claims First Professional Victory.
Read press release

May 15, 2007
R&D Success Story for Integran's Automotive Spin-Off, Morph Technologies
Read press release

May 3, 2007
Integran Technologies USA Awarded Contract by NASA.
Read press release

April 5, 2007
Integran’s automotive spin-off company, Morph Technologies, featured in Race Tech Magazine
Read article (1MB pdf)

March 21, 2007
Integran Awarded Contract by Saudi Aramco for Application of Nanotechnology in the Oil & Gas Industry
Read press release

March 16, 2007
Integran to Launch Nanovate™-NS – Erosion Protection Technology at JEC Composites Show in Paris
Read press release

March 9, 2007
Integran to Assist Lynntech Inc. in the Development of a Novel Non-Stick Composite Coating for the US Army
Read article

February 15, 2007
Integran’s Involvement in the Multi-National Joint Strike Fighter Initiative Featured in Design-Engineering Article
Read article

February 12, 2007
Integran Develops Nano-metal Coating to Improve Durability of Composite Tooling
Read press release

January 23, 2007
Integran Spin-off PowerMetal Featured in Golfweek Magazine with New Golf Shaft Technology
Read full article (5MB pdf)

January 10, 2007
Integran Spin-Off Ranked One of the Top Global Nanotech Start-Up Companies in 2006
Read full press release (pdf)

December, 2006
Integran Featured in University of Toronto Engineering Alumni Magazine
Read full article (pdf)

October 20, 2006
Integran featured in a Globe and Mail article:
Link to Globe and Mail article

Sept 6,2006
Integran Technologies’ Affiliate signs Master Marketing Agreement with SAIC and receives investment from SAIC Venture Capital Corporation
Read full press release (pdf)

June 21, 2006
Integran Receives Xerox Award for Development & Application of Nanotechnology in Canadian Industry
Press Release of Award Winners
Listing of all Nominees


Integran licenses Nano Cobalt environmental hard chrome plating alternative
June 1, 2006
Integran Technologies Inc. today announced that it has licensed its nano Cobalt plating process to Enduro Industries Inc. for deployment as an alternative to hard chrome plating in the fluid power market.
Read full press release (pdf)

Not-so-heavy metal meets golf
February 10, 2006
Read online copy of the article
MS Word version of the article available for download

Integran's nanotechnology featured in USA Today article
August 17, 2005
Link to scanned copy of the USA Today article
Text version of main article

June 27, 2005
The Government of Canada today announced a $3.4 million investment in the development of new nano-technology-based coatings for the aerospace industry which will advance more environmentally sound technologies.  This Technology Partnerships Canada (TPC) investment is part of an $8.6 million research and development initiative being undertaken by Toronto-based Integran Technologies Inc. through the multinational Joint Strike Fighter program.
press release

Nano-Materials - Enabling the Design of New Products
April 5, 2005
Frank Cotter of Integran to present: "Nano-Materials - Enabling the Design of New Products" at Nano-Network, A Meeting Sponsored by the Cleveland Chapter of the Product Development Management Association
HealthSpace Cleveland, 8911 Euclid Avenue, Cleveland OH. see website

Grain Boundary Engineered (GBE®) Materials – The Wise Choice for Medical Implants and Devices
February 14th, 2005
Integran Technologies Inc., and Vascotube GmbH, Birkenfeld/Pforzheim, Germany, a manufacturer of medical precision tubing have entered an exclusive cooperation in the application of grain boundary engineered materials for medical devices. read complete announcement in pdf format

Canadian Company is Engineering Innovative Materials for the Future of Metal Finishing
Source: Plating & Surface Finishing, July 2004
July 2004: Integran featured in Plating and Surface Finishing; read article in pdf format

New uses for Nano-Crystalline Nickel: Ultra-fine grain size, key to new applications for nickel in the defense industry and in consumer sporting goods.
Source: Nickel, Vol.19, No.3, July 2004
July 2004: Integran Featured in the Nickel Institute's Nickel Magazine: New uses for Nano-crystalline Nickel: web link to article, article in pdf format (slightly different)

Nanotechnology - from Electronics to Sunscreen
Source: Plating & Surface Finishing, June 2004
June 2004: Plating and Surface Finishing interviews Dr. Francisco Gonzalez - Integran's Vice President of Product and Process Development; read article in pdf format

Who's Who in Nanotech
Source: BCC Inc. www.bccresearch.com Vol.7 No.5
June 2004: Integran President & CEO Featured in Nanoparticle News - Who's Who in Nanotech: link to article in pdf format

Canadian firm's nanomaterials make heavy metal lighter, stronger
Source: Small Times
March 27, 2003 - Research into nanometallurgy has confirmed that reducing the grain in almost any metal will greatly increase its strength and resistance to wear. A Canadian company, Integran Technologies Inc., holds at least a dozen patents on processes related to nanometals and is successfully moving the technology to market.
To see the rest of the article, click here